PRODUCTION

Boxmaker for special boxes and/or all sizes

CLEVER SLOTTER 2500 TO 5500 X 2800

The CLEVER SLOTTER changes the old concept of the slit length determined by the circumference of the slit sleeve.

CLEVER BOXMASTER 2750

Transverse boxmaker for creasing, slotting, die-cutting, slitting and printing corrugated board sheets and producing packaging from more than 100 FEFCO codes. It is a machining unit for the low-cost production of small and large corrugated cardboard boxes and very large packaging in one step and one piece.

JUMBO PRINT VARIABLE 2600

Enables exceptional performance that is impossible to achieve with other printing machines

The cliché cylinder is equipped with four origins to print four different monochrome clichés according to the programme in a single step and can also repeat the same cliché several times in different positions on the sheet.

The Jumbo Print Variable can also print with a single cliché with a maximum size of 2600 x 2400, even with a solid bottom, and repeat it along the entire length of the sheet up to 9990 mm.

Stitching, semi-automatic and arm machines

STITCHING MACHINE MOD. XA32 - B1600 / 2450

It has an arm design, with a large support table for processing large sheets with minimal effort by the operator.
A version with the bench made in two halves and the arm with a depth of 800 mm is manufactured for stitching tube boxes.
The stitching head also constructed for large thicknesses produces a stitch shank of up to 32 mm.

ONE-HEAD STITCHING MACHINE MOD. XD32

The stitching machine Mod. XD 32 is mainly used for stitching corrugated cardboard boxes or even hot or cold gluing them.

XC 32 BRUSHLESS TWO-HEADED STITCHING MACHINE-GLUER

The XC 32 stitching heads can stitch cardboard thicknesses from 5 to 32 mm at a speed of 500 stitches per minute, using 2.5 x 0.50 mm or 2.30 x 0.90 mm plates. The friction system has been completely replaced by brushless motors, which benefits precision, efficiency, reliability, ease of use and maintenance.

Ancillary machines

MULTISLIT AIRLOCK MF 2300/400/600

The machine is equipped with self-braking motors – with double control – either by foot pedal – or by hand buttons. Automatic motor disengagement at each end of stroke.

The machine can work in either continuous or alternating mode. The command to the eccentric shaft is oil-bath. The movement of the slit arms are motorised.

Robust, fast and high-performance construction.

CREASING MACHINE TC1600 TC2800 TC3200 TC 3600 AIRLOCK

The TC 1600 AIR-LOCK creasing machine with rotating shafts can cut and crease corrugated cardboard sheets in both reed and counter reed directions.

The maximum board thicknesses that can be processed are: 10 mm for Model TC 1600, 13 mm for Model TC 2800, 16 mm for Models TC3200 and TC 3600.